Material
PA-GF
PA-GF blends polyamide powder and glass beads to offer all the advantages of regular polyamide, but with a much higher thermal resistance (up to 110°C). This material is ideal for functional prototypes and end-use parts that need high rigidity and tensile strength, and for demanding environments where temperature performance or wear resistance is key.
Technical specifications
| Maximum part dimensions | 630 x 330 x 550 mm |
| Standard accuracy | ±0.3% (with a lower limit of ±0.3 mm) |
| Layer thickness | 0.12 mm |
| Minimum wall thickness | 1 mm |
| Minimum detail size | 0.3 mm |
| Interlocking or moving parts | Yes |
| Internal channels | Yes |
| Surface structure | Grainy structure |
Datasheet
| PARAMETER | VALUE | UNIT | METHOD |
| - | 1.22 | g/cm³ | |
| DIN EN ISO 527 | 51 | MPa | |
| DIN EN ISO 527 | 3,200 | MPa | |
| DIN EN ISO 178 | 2,900 | MPa | |
| DIN EN ISO 180 (Notched, Izod) | 4.2 | kJ/m² | |
| DIN EN ISO 527 | 6 | % | |
| ASTM D2240 | 80 | Shore D | |
| ASTM D648 (@1.82 MPa) | 110 | °C |
Actual values may vary with build conditions and in relation to the part’s geometry and orientation.
Please get in touch with our team for more information and guidance.
Finishing degrees
The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.
Normal
- Loose powder removed
- Sandblasted
Sealing, standard
- Loose powder removed
- Sandblasted
- Treated with sealant that fills small pores
- Results in airtight/watertight parts
Sealing, fuel-resistant
- Loose powder removed
- Sandblasted
- Treated with sealant that fills small pores
- Results in airtight/watertight/fueltight parts, with chemical resistance against automotive liquids
- Not available for online orders
.jpg&w=1920&q=100)
Color dyed
- Loose powder removed
- Sandblasted
- Parts are color dyed by being submerged in a bath containing color pigment
- Due to the unique nature of the laser sintering process, e.g. in terms of parameters, build position, and light deflection, color intensity may vary
- This finish is only possible for parts with maximum dimensions of 400 x 330 x 360 mm (black) or 150 x 150 x 150 mm (other colors: brown, purple, blue, petrol, green, bordeaux, red, orange, yellow)
Smooth
- Loose powder removed
- Sandblasted
- Parts are mechanically polished by being placed in a tumbler, together with pebbles, which then vibrates at a high frequency (for PA-GF this finish is only recommended for sturdy parts due to the brittleness of the material)
- This process only smooths the outside of your part; it is not possible to completely polish the inside
- As the polishing process removes 0.1 mm of material from your part, you should add extra wall thickness to avoid problems
- Small details and thin walls could be worn away and may even disappear
- Edges will be rounded and your part will become less ‘crisp’ once tumbled
- This finish is only possible for parts ranging from ±30 mm to 200 mm
Smooth + color dyed
- Loose powder removed
- Sandblasted
- Parts are mechanically polished by being placed in a tumbler, together with pebbles, which then vibrates at a high frequency
- (for PA-GF this finish is only recommended for sturdy parts due to the brittleness of the material)
- This process only smooths the outside of your part; it is not possible to completely polish the inside
- As the polishing process removes 0.1 mm of material from your part, you should add extra wall thickness to avoid problems
- Small details and thin walls could be worn away and may even disappear
- Edges will be rounded and your part will become less ‘crisp’ once tumbled
- Parts are color dyed by being submerged in a bath containing color pigment
- Due to the unique nature of the laser sintering process, e.g. in terms of parameters, build position, and light deflection, color intensity may vary between parts
- Colors will appear lighter than on parts that have not been tumbled
- Differences in smoothness (e.g. inside and inside of corners) may lead to some color variation
- This finish is only possible for parts ranging from ±30 mm to 200 mm
Spray paint A-side/2-side (dead matte, 10% gloss)
- Loose powder removed
- Sandblasted
- Dead matte paint (10% gloss) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (dead matte, 10% gloss)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P400
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Dead matte paint (10% gloss) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (matte, 30% gloss)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P400
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Matte paint (30% gloss) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (satin, 50% gloss)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P400
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Satin paint (50% gloss) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (high gloss, 90% gloss)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P400
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- High-gloss paint (90% gloss) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (soft touch)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P240
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Soft-touch paint (transparent coating) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (fine texture)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P240
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Fine-texture paint (matte color paint with fine texture) sprayed on the A-side/both sides. Painted according to RAL specifications
Primer + paint A-side/2-side (spatter)
- Loose powder removed
- Sandblasted
- Polysurfacer sprayed on the A-side/both sides
- A-side/both sides are sanded with P240
- Primer paint sprayed on the A-side/both sides (light gray)
- A-side/both sides are sanded (wet) with P800
- Spatter paint (matte color paint with coarse texture) sprayed on the A-side/both sides. Painted according to RAL specifications
Additional finishes
Additional finishes are available on request:
- Primer ready to paint
- Primer + paint (texture D30/D50)
- Color dyed + spray paint
- Smooth + spray paint
- Smooth + color dyed + spray paint
- Sealing varnish
To discuss your needs, please get in touch via the link below.
Train and learn
Get more from your next project with helpful resources dedicated to PA-GF and selective laser sintering.
