Material

Agilus

Agilus 30A is a flexible, rubber-like resin with superior tear-resistance and elongation at break. It is ideal for concept models and rapid prototyping of rubber components like grips, seals, and non-slip surfaces, or other components that will be subject to repeated flexing and bending.

Close-up view of two black 3D-printed bellows made from Agilus using PolyJet

Technical specifications

Maximum part dimensions

350 x 250 x 100 mm

Standard accuracy

 0.1 – 0.3 mm (varies depending on geometry, part orientation and print size)

Layer thickness

 0.032 mm

Minimum wall thickness

1 mm

Minimum detail size

0.5 mm

Interlocking or moving parts

Yes

Internal channels

No

Surface structure

Slightly rough, matte surface

Datasheet

PARAMETERVALUEUNIT

Tensile strength

ASTM D-412
2.4 – 3.1

MPa

Elongation at break

ASTM D-412
220 – 270

%

Hardness

Scale A
30 – 35*

Shore A

Tensile tear resistance

ASTM D-624
4 – 7

Kg/cm

Compressive set

ASTM D-395
6 – 7

%

Density

ASTM D-792
1.14 – 1.15

g/cm³

Actual values may vary with build conditions. Shore values are provided by Stratasys.

*Please note that Agilus is easier to bend than rubbers of the same Shore A hardness.

Download as PDF

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Get in touch

Would you like to ask a question or start working on a project? We’d love to hear from you.

Talk to our team