Advanced 3D simulation, modeling and printing in TMVR

Prof. Thomas Modine, MD, PhD, MBA, Cardiovascular and Thoracic Surgeon CHU de Bordeaux, Bordeaux, France

As part of the CSI virtual webinar series, Prof. Modine from the CHU de Bordeaux presented on advanced 3D simulation, modeling and printing in TMVR.

3D-CT planning provides enhanced 3D insights, and its use of AI allows for consistent and efficient planning. Its automatic method is proven to reduce neo-LVOT assessment time by between 67% and 87%* and provide a more consistent neo-LVOT prediction (ICC= 0.99) than traditional CT planning (ICC = 0.89)**.

Augment the predictability, trust the outcome.


Screenshot from the webinar Advanced 3D simulation, modeling and printing in TMVR


Watch this webinar to:

  • Understand why TMVR is here to stay

  • Learn how to approach TMVR CT screening and device selection, using, Sapien, Tendyne, Intrepid, or Cephea devices

  • Explore how 3D-CT planning can impact the screen failure rate for TMVR

  • Investigate the accuracy of 3D-CT planning, compared to post-op results

*Ward et al., A More Efficient Method of Patient Evaluation for TMVR: Planning for Best- and Worst-Case Position, JACC, 2019

**Wang et al., A More Reliable Method for Predicting Neo-LVOT Obstruction after TMVR, JACC, 2018

Materialise medical device software may not be available in all markets because product availability is subject to the regulatory and/ or medical practices in individual markets. In countries where no regulatory registration is obtained of Mimics and/or 3-matic Medical, a research version is available. Please contact your Materialise representative if you have questions about the availability of Materialise medical device software in your area.


Personal Details

Register to watch recording

Profession -> Industry
What is your field of interest
Additional Information
Internal Info