Material
ABS-like Polyurethanes
Vacuum-cast ABS-like polyurethanes resemble injection-molded ABS, making them ideal for high-quality prototypes or small series of end-use parts such as product housings or covers. Our wide range of materials offers a choice of properties, including materials that are flame retardant, food-safe, and UV-stable, as well as a variety of finishes. For use with silicone molds.
Technical specifications
Maximum part dimensions | 1,900 x 900 x 750 mm (maximum part volume: 10 liters) |
Standard accuracy | ±0.3% (with a lower limit on ±0.3 mm on dimensions smaller than 100 mm) |
Layer thickness | 0.1 mm for master model |
Minimum wall thickness | 0.75 – 1.5 mm depending on the material and geometry |
Minimum detail size | 0.5 mm depending on complexity and finishing degree |
Interlocking or moving parts | No |
Internal channels | No |
Surface structure | High-quality surface, comparable to injection molding |
Datasheet
PARAMETER | VALUE | UNIT | METHOD |
ISO 2781 | 1.14 | g/cm³ | |
ISO 868 | 80 | Shore D | |
ISO 868 | >65 (120°C) | Shore D | |
ISO 527 | 60 | MPa | |
ISO 527 | - | MPa | |
ISO 178 | 80 | MPa | |
ISO 178 | 2,300 | MPa | |
ISO 527 | 11 | % | |
ISO 179/2D (Charpy) | >60 Charpy | kJ/m² | |
ISO 11359-2 | > 120 | °C | |
ISO 75 Ae | 110 | °C | |
- | 5 – 10 | mm | |
- | Black | ||
- | - | -/+/++/+++ | |
- | High thermal resistance | ||
- | ABS |
Actual values may vary with build conditions.
Finishing degrees
The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.