How to Run a Calibration Job for the Simulation Module

No time to watch the complete video? Jump to the topics of your interest. Have a look at the time stamps below.

• Create a calibration build 1:22
• Running a calibration job 2:41

1. Go to the Simulation ribbon, and click on Prepare calibration build. If needed, position the calibration parts on the build plate.
2. After printing, do not apply heat treatment on the calibration build. Instead, measure the z-height of each calibration part, wire-cut the parts through the teeth, and measure the deformation of the parts after cutting.
3. Go to the Simulation ribbon, and click on Calibration.
   1. Enter the Job name, export location, calibration Profile name, material type, Cut height, and the Part deformation values. Your calibration job will be added to the Job Manager.
      1. If you have not yet opened it, the window will appear when you click on Job Manager in the Plug Ins ribbon.
      2. If you’ve already opened it before, go to the system tray, find the Job Manager, right-click and select Show/Hide.
   2. Go to the Job Manager and Run the calibration job.
   3. Once the job is finished, your calibration profile will be ready to use.