Materialise Magicsでビルドプラットフォームを作成・カスタマイズする方法

No time to watch the complete video? Jump to the topics of your interest. Have a look at the time stamps below.

• Depending on the type of Build Processor you are using 1:00
• Adding a machine without a Build Processor 1:17
• Adding a Build Processor machine 2:28
• Modifying machine properties 3:21

1. Add a machine to your list of machines in Magics:
   1. (If you have a Build Processor): Go to the Build Processor Manager, click on Add Machine. If your machine is connected to the same computer, set your search location to Local, and find your machine from the list. Click on Add, and follow the instructions. If your machine is elsewhere on your network, switch to a network machine, and enter the address of your machine. Once the machine is found, click on Add, and follow the instructions.
   2. (If you don’t have a Build Processor): Go to the Build Preparation ribbon and to My Machines. Click on Add from Library, select your working units (inches or mms), find your machine vendor and your machine model, and drag and drop it to the right-hand side. If you cannot find your machine in the list, either select another machine that is similar to yours, or start with a generic machine profile, which you can find at the end of the list.
2. Change machine properties:
   1. Go to the Build Preparation ribbon and New Scene. Select your machine from the drop-down list, and click on OK.
   2. Go to the Build Preparation ribbon and click on Machine properties.
   3. On the first page, General info, give your machine a name, specify the material you will use, change the shape and size of your build volume, configure the direction of your recoater movement and the gas flow (for metal printers), and define overlap regions that can be accessed by different lasers.