자료

Stainless Steel (SS316L)

Stainless Steel (SS316L) is a low-carbon nickel-chromium-molybdenum based steel alloy that combines excellent strength, high ductility, and good thermal properties. With its high resistance to corrosion and pitting, including chemical corrosion, this material is suitable for food-safe applications, wearables, machine components, and medical instruments, amongst others.

Close-up view of a 3D-printed bracket used in production by Philips

기술 사양

Maximum part dimensions

250 x 250 x 305 mm

250 x 250 x 275 mm (online orders)

Standard accuracy

Better than or equal to the industry standards:

  • DCTG 6 of DIN EN ISO 8062-3 for dimensions between 0.5 and 30 mm
  • DCTG 8 of DIN EN ISO 8062-3 for dimensions between 30 and 400 mm
  • DIN ISO 2768-1 c (coarse) for dimensions between 0.5 mm and 400 mm

See design guidelines for more information on standard accuracy.

Layer thickness

Standard: 0.08 mm, Performance: 0.04 mm

Minimum wall thickness

Standard: 1 mm, Performance: 0.5 mm

Minimum detail size

0.4 mm

Interlocking or moving parts

No

Internal channels

Yes

Surface structure

Rough surface

등급

표준 또는 퍼포먼스 등급을 선택하여 모든 프로젝트에서 퍼포먼스와 효율성의 균형을 유지합니다.

데이터시트

매개 변수표준구성 단위

Density

WGE-Prod-067EN
>7.91

g/cm³

Relative density

WGE-Prod-067EN
>99.0

%

Tensile strength

DIN EN ISO 6892-1:2009
>510

MPa

Yield strength

DIN EN ISO 6892-1:2009
>300

MPa

Elastic modulus

DIN EN ISO 6892-1:2009
180

GPa

Elongation at break

DIN EN ISO 6892-1:2009
>45

%

Roughness Ra

ISO 4287 / AITM 1-00070
<20

µm

Roughness Rz

ISO 4287 / AITM 1-00070
<90

µm

Hardness

ISO 6597-1:03-2006
>170

HV

Actual values may vary with build conditions.


Strong tensions due to part geometry may distort parts, potentially leading to greater deviation in values. Values for surface roughness depend on the orientation of the surface; downward-facing surfaces and surfaces with support will be rougher.


These values show the material characteristics with additional stress relief heat treatment. Extra heat treatment steps or aging for even higher mechanical properties may be possible, e.g. for serial-produced parts. 


Please get in touch with our team for more information. 

PDF로 다운로드

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Get in touch

Would you like to ask a question or start working on a project? We’d love to hear from you.

Talk to our team