자료

ABS-like Polyurethanes

Vacuum-cast ABS-like polyurethanes resemble injection-molded ABS, making them ideal for high-quality prototypes or small series of end-use parts such as product housings or covers. Our wide range of materials offers a choice of properties, including materials that are flame retardant, food-safe, and UV-stable, as well as a variety of finishes. For use with silicone molds.

Close-up view of a red and black part of a portable crack detector, vacuum casted using the ABS-like polyurethane material

기술 사양

Maximum part dimensions

1,900 x 900 x 750 mm (maximum part volume: 10 liters)

Standard accuracy

±0.3% (with a lower limit on ±0.3 mm on dimensions smaller than 100 mm)

Layer thickness

0.1 mm for master model 

Minimum wall thickness

0.75 – 1.5 mm depending on the material and geometry

Minimum detail size

0.5 mm depending on complexity and finishing degree

Interlocking or moving parts

No

Internal channels

No

Surface structure

High-quality surface, comparable to injection molding

데이터시트

선호하는 재료를 선택하십시오:
매개 변수가치구성 단위

Density

ISO 2781
1.14

g/cm³

Hardness at 25°C

ISO 868
80

Shore D

Hardness at 60°C

ISO 868
>65 (120°C)

Shore D

Tensile strength

ISO 527
60

MPa

Tensile modulus

ISO 527
-

MPa

Bending strength

ISO 178
80

MPa

Bending modulus

ISO 178
2,300

MPa

Elongation at break

ISO 527
11

%

Impact strength

ISO 179/2D (Charpy)
>60 Charpy

kJ/m²

Glass transition temperature

ISO 11359-2
> 120

°C

Heat deflection temperature

ISO 75 Ae
110

°C

Max casting thickness

-
5 – 10

mm

Color

-
Black


Colorability in mass

-
-

-/+/++/+++

Special purpose

-
High thermal resistance


Thermoplastic similarity

-
ABS


Actual values may vary with build conditions.

Download Flammability Certificate for HMPU14

PDF로 다운로드

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Get in touch

Would you like to ask a question or start working on a project? We’d love to hear from you.

Talk to our team