Tutorial video

抜き穴を作成する方法

Thanks to 3D Printing, it is possible to print hollow parts to decrease printing time, recover material, and make the parts lighter. However, some 3D printing technologies use powder or resin that can get stuck in the hollow part. The perforation tool in Materialise Magics enables the removal of this powder or resin. Watch the tutorial below to learn how to add perforations to your hollow 3D model.

前提条件

Video topics

お急ぎの方へ

1:06 – 仮抜き穴を追加

1:49 - 仮抜き穴を移動

1:36 - 作成した仮抜き穴を削除

1:28 – 切り欠きを追加

2:06 – ふたの作成

2:17 – クリアランスを追加

2:37 - 抜き穴を適用

Description of the different steps

  1. Select your hollow part(s).
  2. Go to the Tools ribbon > Perforator.
  3. Click on your part(s) to create perforation preview(s):
    1. You can move a preview by selecting it, and dragging it while pressing your left mouse button.
    2. You can delete a preview by selecting it, and pressing Delete on your keyboard, or clicking on Delete on the perforator window.
  4. Modify your perforation preview(s):
    1. Use the Radius outer circle and Radius inner circle options to change the size of your perforation(s).
    2. Use the Add notch option under Notch to facilitate the re-assembly of perforation caps.
    3. Use the Keep subtracted parts option under Advanced options to save the perforation caps as separate STLs. After printing, these caps can be attached back to the part. In order to leave clearance for glue or welding, use the Total Clearance option. You can add a clearance on the inside, outside, or both sides.
  5. Once your previews are ready, click on Apply.
作成者: Aylin Kertik
Contributor(s)
チュートリアル作成日 23 4月 2018
最終変更日 23 4月 2018

関連チュートリアル