To reduce manufacturing cost per part for a series of metal suction grippers


Design for AM (DfAM) principles applied to reduce gripper volume and fit more grippers in each build


Design optimization, metal production


Design & Engineering services and Certified Manufacturing in Metal 3D Printing

Production tools are one of the applications where additive manufacturing (AM) truly shines. One illustrative example of this is the redesign of a suction gripper that lifts light, cylindrical objects in a series production system. The redesign, in which Materialise worked closely with the customer, resulted in several significant improvements. To name but one: manufacturing costs per gripper were halved.

3D printing design by the customer

The customer’s suction gripper was originally designed so that it could be manufactured entirely with conventional production tools. For the necessary internal channels, several straight holes were drilled from different directions in order to intersect each other. Openings were sealed with dummy plugs. To avoid further increasing component costs, the customer did not carry out any further milling work to reduce the volume of the gripper when possible.

The customer already had experience with additive manufacturing of plastic parts and was familiar with their advantages in terms of costs and efficiency, especially for production tools. Nevertheless, as with all redesign ideas, they had to start by asking themselves whether 3D printing would really be worthwhile in regard to this gripper as well. A comparison of their requirements for the gripper with the possibilities that come with 3D printing led to a clear outcome: lower manufacturing costs, lower weight in order to be able to perform faster movements, shorter gripping cycles, better vacuum distribution, and fewer leaks are all goals that can be achieved with AM and the associated design freedom.

The customer’s choice of material was aluminum. On the one hand, the metal is significantly more wear-resistant than plastic, yet still lightweight. On the other, it facilitates smooth surfaces that are easy to clean. This was important to the customer in order to easily keep the gripper clean during ongoing production. Furthermore, aluminum is economically very well suited for small to medium-sized components with a high value and small quantities.

After the customer had developed a design for AM themselves, they contacted Materialise to have the component produced here. Our Design & Engineering team quickly recognized that the design could be improved even further. Although the customer’s own design already offered a significant weight reduction, the production costs were higher than with the original production method, and the internal channels were not aerodynamically optimized.

Siemens NX Realize Shape module

Having gotten the green light from the customer, our engineers got to work on further optimizing the 3D printing design. They used the Siemens NX Realize Shape module for the redesign, which enables free-form modeling. Using Materialise Magics software, the experts also optimized the geometry with regards to the printing process. To achieve this, they used a preview function that can display all necessary support areas for a component in the selected component orientation. This enabled them to ensure that no support structures were needed inside the component to print the converging walls. The design team arranged the parts in the installation space in such a way that further minimized the number of required support structures, and optimized the quality of the contact surfaces in the gripping area. It was also essential that the new design ensured homogeneous distribution of the vacuum on the gripping points. This makes picking up the cylindrical body more reliable.

Then, the Materialise engineering team reduced the tension lines by making the transitions between thin and thick material thicknesses more fluid. This was important because stress lines not only negatively affect the external appearance, but also the mechanical properties of the final part.

In this way, the total volume and weight of the component were reduced to a necessary minimum. This has a direct impact on material costs since unused material can be largely recovered and directly reused in 3D metal printing – unlike in metal-cutting processes. Thus, significant costs are only incurred for the material that is actually required for the component and support structures. The small number of supports and minimal contact surface in non-critical areas with the component also have a positive effect on post-processing. This allows the support structures to be removed without heavy outlay in time and effort. As a final step, only the threads for the assembly had to be cut.

Image01: The preview in Materialise Magics shows the minimized supports required (left) and the section (right) shows the support-free channels.

Compared to the customer’s original 3D-printed model, an additional time and cost advantage was achieved: the number of components in each build increased from 28 to 46. The new geometry of the component allows a significantly more efficient arrangement on the build platform, which also has a positive effect on the price per part.

Image02: View of the gripper’s suction areas

Image03: The suction gripper optimized for 3D printing

A comparison of volume values and manufacturing costs between the original tool, the first 3D-printed model, and the final design shows how much progress has been made: while the customer’s first designed-for-AM model already had 79% less volume than the original milled and drilled gripper, the gripper optimized by Materialise now only has 6% of the volume of the original part. The cost per part has been reduced from €300 for the traditional tool to €150 for the Materialise version. The customer’s first 3D print design would have been 6% more expensive to produce.

All in all, the example of the suction gripper shows how additive manufacturing and an optimized additive design can be used to achieve a cheaper, lighter, and functionally optimized production tool. The example also demonstrates the decisive influence the quality of the redesign can have on the profitability of a project. In view of these massive improvements, the customer decided to have their suction grippers manufactured in the optimized 3D print design in the future. 




Conventional design

242.900 mm³






3D printing design by the customer

50.590 mm³






Final 3D printing design by Materialise

15.150 mm³





Got big ideas of your own? See what 3D Printing can do for you!

If you think your project is too complicated, too early-stage, or simply too large for 3D Printing, chances are that one of our project managers would love to help you print it anyway. Give us an idea of what you’re looking for and let us handle the rest.

Get in touch chevron_right