ABS-ESD7 is a durable and electrostatic-dissipative material. The static-dissipative property makes ABS-ESD7 particularly suitable for applications where a static charge could impair performance, such as electronic products with circuit boards. Other applications for this material include end-use components, industrial equipment and jigs, and fixtures for the assembly of electronic components.
Technical Specifications
| Standard lead time | Minimum of 5 working days, depending on part size, number of components and finishing degrees (online & offline orders) |
| Standard accuracy | ± 0.15% (with lower limit on ± 0.2 mm) |
| Minimum wall thickness | 1 mm |
| Layer thickness | 0.18 mm |
| Maximum part dimensions | 914 x 610 x 914 mm (offline orders) 600 x 500 x 600 mm (online orders) |
| Surface structure | Unfinished parts typically have a rough surface but all kinds of fine finishes are possible. FDM parts can be sandblasted, smoothed, colored/impregnated, painted and coated. |
Datasheet
| Units | ASTM# | Range | |
|---|---|---|---|
| Tensile Strength | MPa | D638 | 36 |
| Tensile Modulus | MPa | D638 | 2400 |
| Flexural Strength | MPa | D790 | 61 |
| Flexural Modulus | MPa | D790 | 2400 |
| Notched Izod Impact | J/m | D256 | 111 |
| Unnotched Izod Impact | J/m | D256 | 55 |
| Heat Deflection Temp (0,45 MPa) | °C | D648 | 96 |
| Heat Deflection Temp (1,81 MPa) | °C | D648 | 82 |
| Volume Resistivity | ohms | D257 | 4.0*1010 – 3.0*109 |
| Surface Resistance | ohms | D257 | 109 – 106 |
Actual values may vary with build condition
Design Guidelines
We’ve put together our trusted tips, tricks and best practices to get you off to a solid start. If you’ve been wondering whether this material allows for interlocking parts or embossing, or if you just want to avoid common design mistakes, check out this handy design guide.
How Does Fused Deposition Modeling Work?
FDM is a filament-based technology where a temperature-controlled head extrudes a thermoplastic material layer by layer onto a build platform. A support structure is created where needed and built in a water-soluble material.
